The EHK expanded metal suspension system is suitable for both small and large axles.
elo. verz. steel
Widths up to approx. 1,500 mm, lengths up to approx. 3,000 mm
Fire protection class:
A2-s1, d0, DIN EN 13501-1, with bonded fleece: A2-s2, d0, DIN EN 13501-1
Suspended cassette with edged expanded metal and internal angle frame (EHK-I), butt-welded angle frame (EHK-SA) or with external angle frame with 20 mm visible edge (EHK-A)
Additionally all corner points of the frame welded
Head side: As suspension angle
Longitudinal: as stabilizing angle
(in case of large dimensions, it is recommended to choose the suspension on the longitudinal side).
The design of the angles can be easily adapted to the respective object conditions.
Fitting plates with bevels, radial cut, column cut or corner cut according to room geometry.
Overall height according to requirements and object conditions.
Optionally available with cassette safety device, bearing hooks for folding or automatic joint adjustment
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Streckmetalldecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.