The wide grid K-grid can be installed quickly and impresses with a cost-effective substructure. This system is suitable for continuous laying and is often used in large projects for economic reasons.
System description
K-Grid EHM
Material:
0.4mm aluminum
Bar width:
12mm
Bridge height:
40mm
Modules:
Axle 625x625mm: 62.5,78,104,125,156,208mm
Surface:
Coil coated
Color:
by choice
Fire protection class:
A2-s1, d0, DIN EN 13501-1
Version
Wide grid consisting of a system-specific substructure and prefabricated grid elements
Assembly
The system’s own mounting rails 2,500 mm long with quick-action suspension brackets at a center distance of 625 mm must be suspended from the raw ceiling using approved dowels, screws, etc. and aligned plumb and true.
The maximum suspension distance in the axial direction is 1,200 mm. Between the support rails, the cross rails are inserted from above at a distance of 625 mm with the hook punchings provided for this purpose in the punchings of the support rails. In the same way, the individual louvre elements are then inserted into the resulting fields via the hook punching from above.
The edge connection is optionally made using an L-bracket or a C-profile.
Features
- easy to install
- neutral, straightforward, timeless
- few accessories, therefore very economical in terms of material costs and installation effort
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.