The Contour Grid system uses a substructure of push-fit tubes and can be supplied in a perforated version as an option.
System description
Contour Grid
Material:
0.6mm aluminum
Bar width:
0.6mm
Bridge height:
25 mm / 30 mm / 40 mm (depending on module)
Modules:
Axle 600 x 1200 mm: 20, 30, 40, 50 mm
Axle 625 x 1250 mm: 31.25, 62.5 mm
Surface:
Coil-lacquered with blank cut edges / optionally additionally powder-coated
Color:
by choice
Fire protection class:
A2-s1, d0, DIN EN 13501-1
Version
Insertion grid, consisting of a substructure of plug-in tubes and prefabricated grid elements
Assembly
Use approved dowels, screws, etc. to suspend push-fit tubes with quick-action hangers from the bare floor. The tubes must be suspended from the raw ceiling using approved dowels, screws, etc. and aligned plumb and true to line using quick-release hangers at center distances of 1,200 or 1,250 mm.
The suspension distance must not exceed 1,200 or 1,250 mm in the axial direction. The louvre elements are then hung into the push-fit tube construction by means of 4 suspension hooks and connected to each other by 2 comb connectors per element joint.
The edge connection is optionally made as an open shadow joint, via an L-edge angle or a system-compliant C-profile.
Feature
- narrow fine bridges
- Many possible uses
- neutral and timeless
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.