Expanded metal blanks “FLAT”
Cassette systems “K3”
Cassette systems “pagotec”
System Description
Insertion systems Flat / K3 / Pagotec
Flat
According to the name, Pagolux® expanded metal blanks flat lay flat on T-24 rails and can be easily cut to size on site and thus adapted to a wide variety of room conditions.
Material:
elo. verz. steel or aluminum
Stitch:
by choice
Surface:
powder coated
Color:
by choice
Axis:
625x625mm, 625x1250mm, 600x600mm, 600x1200mm
Fire protection class:
A2-s1, d0, DIN EN 13501-1, with bonded fleece: A2-s2, d0, DIN EN 13501-1
K3 small/classic
he K3 expanded metal cassettes from Pagolux® are always accompanied by an elegant appearance, which is achieved by the recessed edge. Both T-24 and T-15 rail systems can be used with this system.
Material:
elo. verz. steel
Stitch:
10 x 6 x 1.5 x 1 mm (K3 small) or 16 x 11 x 1.5 x 1 mm (K3 classic)
Surface:
powder coated
Color:
by choice
Axis:
625x625mm or 600x600mm
Fire protection class:
A2-s1, d0, DIN EN 13501-1, with bonded fleece: A2-s2, d0, DIN EN 13501-1
Pagotec
Pagolux® Pagotec expanded metal cassettes have a clear 90° upstand in conjunction with a firmly pressed frame profile, which means that there is no risk of injury from open meshes during assembly. This system uses T-15 rails.
Material:
elo. verz. steel
Stitch:
16 x 11 x 1.5 x 1mm or 10 x 7.7 x 1.4 x 0.6mm
Surface:
powder coated
Color:
by choice
Axis:
625x625mm or 600x600mm
Fire protection class:
A2-s1, d0, DIN EN 13501-1, with bonded fleece: A2-s2, d0, DIN EN 13501-1
Assembly
T24/T15 rails with quick-release hangers at a center distance of 1200/1250 mm are to be suspended from the raw ceiling using approved dowels, screws etc. and aligned vertically and flush. The distance between the hangers must not exceed 1,200/1,250 mm in the axial direction. The 1,200/1,250 mm long cross rails and the 600/625 mm long cross rails are clipped in between the main rails at an angle of 90 degrees, resulting in squares with axis dimensions of 600 x 600 mm / 625 x 625 mm.
The expanded metal elements must then be inserted into the substructure in such a way that they can be dismantled at any time.
When installing the expanded metal blanks, the installation direction specified by the manufacturer must be observed so that the meshes are laid in the same direction. A checkerboard pattern on the ceiling caused by twisted panels should be avoided and will not be accepted.
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Streckmetalldecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.