Our Metagrid15 wide-web grid with a web width of 15mm is particularly well-suited for a flat installation and impresses with its cost-effectiveness and timeless appearance.
System description
Metagrid 15
Material:
0.4mm aluminum
Bar width:
15mm
Bridge height:
38.5mm
Modules:
with axis 600 x 600 mm: 75, 100, 120, 150, 200 mm
With axis 625 x 625 mm: 78, 104, 125, 156, 208 mm
Surface:
coil-coated / optionally additionally powder-coated
Color:
by choice
Fire protection class:
A2-s1, d0, DIN EN 13501-1
Version
Wide grid consisting of a substructure of T15 rails (continuous optics) or T24 rails (emphasized optics) and prefabricated grid elements
Assembly
From the raw ceiling, use approved dowels, screws, etc. T15 rails with quick-action suspension brackets at a center distance of 1200/1250 mm and aligned plumb and true.
The suspension distance must not exceed 1,200/1,250 mm in the axial direction.
Between the main rails, the cross rails 1,200 /1,250 mm long are clipped in and, in addition, the 600/625 mm long cross rails are clipped in at an angle of 90 degrees, so that squares with axis dimensions of 600 x 600 mm / 625 x 625 mm are created.
The grid elements are then inserted into the substructure so that disassembly is possible at any time.
Since the web width corresponds to the T-rail width, an endless look is created.
Features
- Endless look thanks to 15 mm bars and T15 rail system
- Many possible uses
- timeless design
- Low assembly effort thanks to insertion assembly in combination with T-rail construction
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.