The system Alu-Grid 5/33 T24 impresses with its timeless appearance and low installation height.
System description
Alu-Grid 5/33 T24
Material:
0,4 mm aluminium
Bar width:
5 mm
Bridge height:
33
Modules:
Achse 600 x 1200 mm: 50, 75, 50 mm
Surface:
coil-coated
Color:
by choice
Fire protection class:
A2-s1, d0
Version
The grids have special adjustment and guide punches for accommodating the
mounting slides and for mounting on T24 profiles.
Assembly
T24 main profiles must be suspended from the raw ceiling at intervals of 600 mm using approved dowels, screws, etc., with quick-release hangers or vernier hangers at the statically required distance of 1200 mm and aligned plumb and flush.
The T24 cross profi les are inserted into the main profi les in the opposite direction every 1200 mm.
The elements are then fitted with 4 mounting sliders and connected to the T24 profile construction from below using mounting sliders.
Features
- Stable thanks to separate substructure
- Stable U-channels
- Resistant surface
- Each grid panel can be dismantled from below – the ideal solution when there is little space in the ceiling cavity
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.