Pagolux® ball-proof Conturraster FS, consisting of a substructure made of CD profiles and prefabricated grid elements made of 1 mm galvanised steel strip, subsequently powder-coated.
System description
Contour Grid Ball-proof FS
Material:
1 mm galvanized steel
Bar width:
1 mm
Bridge height:
30 mm
Module:
50 mm
Surface:
powder coated
Color:
by choice
Fire protection class:
A2-s1, d0
Version
Pagolux® ball-proof Conturraster FS, consisting of a substructure made of CD profiles and prefabricated grid elements made of 1 mm galvanised steel strip, subsequently powder-coated.
Assembly
A counter grid made of CD profiles must be suspended from the raw ceiling using approved dowels, screws, etc. at an axis distance of 1200 mm with Nonius sub-components and aligned plumb and flush.
The suspension distance must not exceed 900 mm in the axial direction. CD profiles must be mounted on the counter grid in the opposite direction at a centre distance of 600 mm using cross connectors.
Holes are drilled in the lower level of the CD profiles at a centre distance of 600 mm. The holes are fitted with rivet nuts.
The contour grids are then fitted with mounting shoes and attached to the CD profile using wing screws.
The system is mounted with an open joint to the wall and ends with a half module. Cut-outs must be placed in the centre of the grid and fitted with a surround or mounting frame for module panels at the factory. The maximum size is 300 x 300 mm.
Features
- Narrow, fine webs
- Wide range of applications
- Ball-impact-resistant design in accordance with DIN 18032-3:2023-12
We will be happy to advise you individually based on your object.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.