The system „Contourgrid ballproof“ was successfully tested according to DIN 18032-3. Investigation report 23.08.2018 ISP GmbH, Bad Laer
System description
Contourgrid ballproof BS
Material:
1 mm galvanized steel
Bar width:
1 mm
Bridge height:
30 mm
Module:
50 mm
Surface:
powder coated
Color:
by choice
Fire protection class:
A2-s1, d0
Version
Ball-proof insertion grid consisting of a substructure made of CD profiles and prefabricated grid elements.
Assembly
From the raw ceiling a cross grid consisting of CD profi les has to be depended by means of Nonius, admitted dowels, bolts etc. with a distance of 1200 mm.
The distance of the Nonius must not exceed 900 mm.
In opposite direction CD profi les have tob e installed with a distance of 600 mm.
The connection to the cross grid occurs by cross connectors.
Afterwards the elements have to be equipped with mounting plates and screwed under the CD profiles.
This system ends with half a module and an open gap to the wall.
Cut outs have to be placed in the centre of the element and have to be surrounded by a frame. The maximum size is 300 x 300 mm.
Characteristics
- slim,delicate grid bar
- large functional range
- ballproof according to DIN 18032-3 and DIN EN 13964
We delight to advise you individual for your objekt.
Care and cleaning instructions:
Pagolux®-Rasterdecken sind wie folgt zu reinigen:
Clean surfaces with slightly damp cloth and then dry with soft cloth.
Important:
- Use only pure water, if necessary with small additions of neutral or weakly alkaline detergents.
- Use only soft, non-abrasive cloths.
- Do not use steam jets or high-pressure cleaners.
- Do not use scratching, abrasive agents.
- Avoid vigorous rubbing.
- Always carry out preliminary tests on non-visible surfaces before cleaning.

